Gsun Tri-Colour Silk PLA Filament

Note: This filament is wounded on a cardboard spool

Looking to create visually striking 3D Prints, then give tri colour filament a try! Achieve a silky gloss like finish on your 3D prints that have a blend of 3 colours. Unlike rainbow filament where the colour change is transitional with the colour changing over time, tri colour filaments allow you to achieve 3 colours across each layer. As a result, you will be able to notice the different colours from various angles when looking at your 3D printed design. 

Please refer to images as a guide. 

Note, the orientation of filament when loaded into your 3D printer will impact what your final print looks like. While we do not expect the filament to twist during printing, should it twist, this will also impact your final print result.

We recommend initially printing a calibration coin to understand how the tri colour filament will colour change on your particular printer.

Note: We have achieved best results when drying out filament first.

Model No.：Tri Color Silk Magic PLA
Diameter Format：1.75mm
Print Temp.：190-220℃
Tolerance：±0.05mm
Print Speed：50-100mm/s
Platform Temp：no need
N.W.：1KG
Length：1.75mm(1KG)=330m 
Tensile Strength：11-16KGF
Melt Flow Rate：4-8g/10min(190℃,2.16kg)

UNIQUE COLOR CHANGE EFFECT – PLA base with silk colors, a 3D filament presenting 3 sides of the color. Every spool's color actually includes a blend of 3 different colors, 3 sides of the color will feature on your finished print. By rotating the part to a different orientation, you can completely change the visible color.

PLA FILAMENT MAGIC COLORS – No need polishing, 3D printing filament with silk smooth appearance; It’s smooth eye-popping glossy outstanding print silk surface.

 HIGH QUALITY &TANGLE FREE – High quality silk PLA filament high purity and without no bubbles, good shaping, no jamming, no warping, melt well, more detail and easy to print. No tangle, machine auto wind, fixed hole steady.

DIMENSIONAL ACCURACY & CONSISTENCY – The dimensional accuracy of the PLA filament 1.75mm is +/-0.05mm, so that print will be smoother without jamming nozzles.

RECOMMEND SETTINGS & NOTES – PLA Filament Extrusion temperature range: 190 - 220°C; pass the filament through the fixed hole to avoid tangles after use. NOTE: Please open the vacuum packaging of the consumables when you need then please store consumables in a cool, dry, and ventilated environment. If not in use for a long time, re-wrap the consumables in film to prevent moisture.

DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.